Shop

“Galvanised fixed right-angle clamp “scaffold clamp” – 48.4mm round capability” has been added to your cart. View cart

Category:

Showing 235–252 of 702 results

Fascia or Wall ‘hockey stick’ extension mount bracket, 316 stainless steel – 1.8m x 25mm diameter

CFB1800-SS

$553.99

Add to cart

Fascia or wall lightweight ‘L’ mount bracket, 304 stainless steel – 200mm offset, 16mm antenna hole, 2 x 6mm mount holes

A-6211

$60.99

Add to cart

Fixed coaxial attenuator, DC-6 GHz, 10W, 5dB attenuation value, 1.3:1 VSWR, N-type male to N-type female

ZWG-CA10AN6-A5

$1,000.99

Add to cart

Fixed position to HD parallel spring base collinear mount base suits ZN2-375-03 / ZN2-675-06 477 MHz collinear – 260mm x 35mm O.D.

ACC Mount

$159.12

Add to cart

FM Radio coaxial isolator, 87.5-108 MHz, 100W, N-type female terminations, 0.6dB insertion loss – 60mm x 28mm

ZIS108NF

$1,061.99

Add to cart

FM Radio single band-pass cavity filter, 88 – 108 MHz, specify 200 kHz, N-type female, 500W, anodised finish – 740mm x 203mm O.D.

ZVBPF-88108

$2,840.99

Add to cart

FME female crimp connector for RG58 coaxial cables, DC-2 GHz, 50 Ohms – nickel plated

FF-7976

$5.99

Add to cart

FME female to SMA female straight inter-series coaxial adaptor, 50 Ohms – nickel plated

ADP-8281

$16.99

Add to cart

FME male crimp connector for MIL-SPEC RG58 coaxial cables, DC-2 GHz, 50 Ohms – nickel plated

FM-7906

$10.99

Add to cart

FME male to BNC male straight inter-series coaxial adaptor, 25W, DC-2 GHz, 50 Ohms – nickel plated

ADP-8295-2

$31.99

Add to cart

FME male to SMA male straight inter-series adaptor, 50 Ohms – nickel plated

ADP-8275

$16.99

Add to cart

FME male to TNC male straight inter-series adaptor, DC-2 GHz, 50 Ohms – nickel plated

ADP-7977-2

$8.99

Add to cart

FME male to to N-type male straight inter-series adaptor, DC-2 GHz, 50 ohms – nickel plated

ADP-7977-3

$22.73

Add to cart

Galavanised V-block and 304 stainless U-bolt clamp – 32-50mm internal capability

UV1

$21.95

Add to cart

Galvanised fixed right-angle clamp “scaffold clamp” – 48.4mm round capability

RB1

$110.08

Add to cart

Galvanised U-bolt and V-block parallel mount clamp – 60mm internal capability

UV4

$74.99

Add to cart

Gas tube coaxial power surge protector , 7/16″ DIN male to 7/16″ DIN female bulkhead, 350V DC sparkover, 200 Watts P/R, up to 2.6 GHz

LA-1793-4

$167.99

Add to cart

Ground dependent 27 MHz CB radio base loaded whip, type 17-7PH stainless steel, 50W, 5/16″-26 brass thread, 2.1 dBi – 1.2m

ZN5-27-12

$74.53

Add to cart

Why Choose ZCG?

Australian owned & manufactured, high quality RF solutions since 1970

Experienced, knowledgeable in-house sales consultants and technical support

Quality certified and reliable, trusted product support

Shop

Fascia or Wall ‘hockey stick’ extension mount bracket, 316 stainless steel – 1.8m x 25mm diameter

Fascia or wall lightweight ‘L’ mount bracket, 304 stainless steel – 200mm offset, 16mm antenna hole, 2 x 6mm mount holes

Fixed coaxial attenuator, DC-6 GHz, 10W, 5dB attenuation value, 1.3:1 VSWR, N-type male to N-type female

Fixed position to HD parallel spring base collinear mount base suits ZN2-375-03 / ZN2-675-06 477 MHz collinear – 260mm x 35mm O.D.

FM Radio coaxial isolator, 87.5-108 MHz, 100W, N-type female terminations, 0.6dB insertion loss – 60mm x 28mm

FM Radio single band-pass cavity filter, 88 – 108 MHz, specify 200 kHz, N-type female, 500W, anodised finish – 740mm x 203mm O.D.

FME female crimp connector for RG58 coaxial cables, DC-2 GHz, 50 Ohms – nickel plated

FME female to SMA female straight inter-series coaxial adaptor, 50 Ohms – nickel plated

FME male crimp connector for MIL-SPEC RG58 coaxial cables, DC-2 GHz, 50 Ohms – nickel plated

FME male to BNC male straight inter-series coaxial adaptor, 25W, DC-2 GHz, 50 Ohms – nickel plated

FME male to SMA male straight inter-series adaptor, 50 Ohms – nickel plated

FME male to TNC male straight inter-series adaptor, DC-2 GHz, 50 Ohms – nickel plated

FME male to to N-type male straight inter-series adaptor, DC-2 GHz, 50 ohms – nickel plated

Galavanised V-block and 304 stainless U-bolt clamp – 32-50mm internal capability

Galvanised fixed right-angle clamp “scaffold clamp” – 48.4mm round capability

Galvanised U-bolt and V-block parallel mount clamp – 60mm internal capability

Gas tube coaxial power surge protector , 7/16″ DIN male to 7/16″ DIN female bulkhead, 350V DC sparkover, 200 Watts P/R, up to 2.6 GHz

Ground dependent 27 MHz CB radio base loaded whip, type 17-7PH stainless steel, 50W, 5/16″-26 brass thread, 2.1 dBi – 1.2m

Product Categories

Shop Australian made antennas for all conditions

Why Choose ZCG?

Search Our Products